Posts mit dem Label Styling werden angezeigt. Alle Posts anzeigen
Posts mit dem Label Styling werden angezeigt. Alle Posts anzeigen

Dienstag, 28. Juni 2011

Der NEUE VERBESSERTE Drunterbunt!

Endlich komm ich dazu euch den neuen verbesserten Drunterbunt vorzustellen!!!

Wie Ihr ja sicherlich mitbekommen habt, habe ich in den letzten Monaten meinen Drunterbunt komplett überarbeitet!

Leider hatte ich mit den ersten so meine Schwierigkeiten, da ich mit Rohlingen gearbeitet habe und die Angaben des Herstellers nicht immer so stimmten. So kam es leider dazu, dass einige Drunterbunts trotz angegebener Größe nicht passte und Bräute ihn zu Ihrer Traumhochzeit doch nicht tragen konnten. Dies tut mir nach wie vor sehr leid und ich möchte mich auf diesem Wege nochmals bei den Bräuten entschuldigen!!!

Diese Tatsache konnte ich nicht auf mir sitzen lassen und habe probiert und probiert und probiert. Nun kann ich Euch voller stolz die neuen Drunterbunt 2011 präsentieren! Wo jeder Zentimeter von mir ist :)

Die Vorteile für Euch:
✿ Alle Größen möglich! Auch für richtig weibliche Bräute ;)
✿ Alle Längen möglich! Egal ob ganz groß oder doch etwas zierlich klein geraten
✿ Ob Petticoat oder Reifrock, ich mach alles ;)
✿ Der Tüll ist an dem selben Satin genäht, der oben drüber liegt. Somit ist alles in der selben Farbe und passt perfekt!
✿ Der Satin liegt sanft auf der Haut, kein kratzen vom Tüll oder billigen Polyester
¤´¨)
¸.•´¸.•*´¨) ¸.•*´¨)
(¸.•´ (¸.•´¤*Ƹ̵̡Ӝ̵̨̄Ʒ*¨´¸.•.•¤´¨)
      ¸.•´¸.•*´ஐ¨(¸.•*✿,,Ƹ̵̡Ӝ̵̨̄Ʒ,,,✿ღ


Ps: "Dir gefällt das"!? Dann ab auf www.Facebook.de/KleinMaedchentraeume

Donnerstag, 25. Juni 2009

Meine Brautfrisur zur Standesamtlichen -In 5 Schritten zur Brautfrisur

In 5 Schritten zur Brautfrisur

1. Als erstes habe ich mir meine Haare lockig geföhnt mit VIEL Haargel. Wenn ihr keine eignen Locken habt, empfehle ich euch zum Lockenstab zu greifen oder Papilotten oder Lockenwickler rein zu drehen.

2. Anschließend habe ich meinen Kopf nach hinten gehalten und angefangen wild Haarklammern reinzustecken (sie werden mit der geschlossenen Seite nach unten hin reingeschoben und dann nach oben rein gesteckt, hoffe ihr habt das verstanden) bis ich den ersten halt hatte.

3. Nun habe ich meine selbstgebasteltes Didadem auf den Kopf gelegt und unter dem "Dut" festgeknotet. Dabei habe ich darauf geachtet, dass vor den Ohren noch Haare waren, denn ich wollte diese nach innen drehen, so das das Satainband quasi im Haar verschwindet.

4. Nachdem das Diadem festsaß und zusätzlich noch mit Schiefspängchen gefestigt wurde. Habe ich erneut meinen Dut mit Haarklammern festgesteckt. Nun habe ich aber etwas mehr Form rein gebracht und vereinzelnt Locken geformt, soweit man das eben kann.

5. Zum Schluss Tonnen Haarspray. FERTIG!







Sonntag, 10. Mai 2009

Brooch Bracelet

DIY Wedding Challenge: Brooch Bracelet article photo

When I first saw Dana Saylor's creations on PW, I will admit I wanted to jump right on the bandwagon.  However, once I saw the price tag on those beauties, I thought "Hey I can make my own!"  And I did!


Supplies:
  • vintage brooch
  • pearl beads in size 6mm and 8mm(you can get 4 mm beads as well if you want 5 strands)
  • rondelles in sizes 6mm and 8mm
  • clear beading wire
  • silver crimps
  • jewelry long nose pliers
  • one multi-strand clasp (3 strand in my case)

Directions:
1) Cut a long piece of beading wire (longer than the circumference of your wrist--you will cut it down later)
2) Attach it to one side of the brooch by looping it through a crimp bead, then through a middle opening on the brooch and then threading it through the crimp bead again.  Take your pliers and set the crimp bead in place by squeezing it flat.
3) Repeat step 2 twice.  Once on an opening above the middle and once on an opening below.
4) Now repeat steps 2 and 3 on the other side.
5) Now you're ready to start beading.  Start with the middle strand.  You will use the larger pearl beads (size 8mm) here.  Thread one pearl bead through the wire and follow it with a rondelle.  Now bead two pearl beads and follow those with a rondelle.  Continue alternating two pearl beads and one rondelle until the strand reaches about halfway around your wrist.
6) For the next two strands on either side of the larger beads, you will use the next size down (size 6mm).  You want to make sure your rondelles alternate with the middle strand.  Use 3 pearl beads followed by a rondelle.  Continue that pattern until it reaches the length of the middle strand.
7) Now repeat steps 5 and 6 on the other side of the brooch.
8) You may have to play around with the length of both sides to ensure proper fitting around your wrist.  Once you are happy with the lengths, you are now ready to attach your clasp.
9) Thread your wire through a crimp bead then through the corresponding loop on the clasp.  Finally thread the end of the wire through the crimp bead again and close it with your pliers.
10) Repeat step 9 for all strands.


Queele: http://www.projectwedding.com/wiki/show/diy-wedding-challenge-brooch-bracelet

Samstag, 9. Mai 2009

Hochzeits Haarclip

Materials:
  • silk flower (mine is a peony-type)
  • feathers (optional)
  • fabric glue
  • small styrofoam ball, about 2" (I recommend using 'smoothfoam', which is more solid and is stronger than regular styrofoam)
  • Swarovski crystal beads or glass beads
  • faux pearl beads
  • flat-head straight pins (look in the jewelry aisle, they look just like sewing straight pins, but have a flat head on the top)
  • alligator hair clip
Instructions:

Remove the flower from the stem. If your flower is almost the size of your head like mine was, remove a few of the outer petals to make it smaller. Also remove any plastic pieces from the center of the flower. Glue the petals back together on top of each other, layering them by size.

If you're using feathers, trim them down to your desired size (longer for more feather goodness, shorter if you want them to be subtle) and glue them to the backside of the flower.

Then you can add the alligator clip on top of the feathers. I made sure the clip I bought had a large, flat surface so I could glue it to the flower.

While the feathers and clip dry, start working on the inside. Take one of the small styrofoam balls and cut in in half. Take a bead and thread it onto a flat-head pin. Cut the pin to a shorter length so it will stick into the half-sphere, but not out of the other side. Dip the pin in the fabric glue to ensure it stays put once you've stuck it into the ball.

Start arranging the beads in random order (or you can make a pattern if you like) by sticking them into the styrofoam. This will give you a 3-dimensional look once you add it to the center of the flower, which really shows off the sparkle.

Once you've covered the styrofoam, add a generous amount of glue to the bottom of the beaded ball, and stick it in the center of your flower.

And there you have it! A custom-made, one of a kind hair flower for under $20.00. Have fun with it...change the bead or feather colors to match your wedding colors, or even do a colored flower.
For more DIY projects, visit my blog!


Quelle: http://www.projectwedding.com/wiki/show/diy-hair-flower and http://www.withthisringwedding.blogspot.com/

Bridal Shoes Letter Bling

Step-by-step instructions on how to put rhinestones on the undersides of your bridal shoes with your initials for the big day!
DIY Wedding Challenge: Bridal Shoes Letter Bling article photo Shoes, Rhinestones, Lilac
photo by: AnnaB83
I saw a couple pictures of blinging up the bridal shoes with the initials of the bridal and groom, and I couldn't help myself from doing another DIY project! I wish I could have a little diversity, but our names are "Anna" and "Andre" so I'm stuck with "A" and "A."  I suppose you could do your own initials or your new initials after you'll be married, but I wanted it to be the two of us :)
I saw the pics, but didn't know how it was done, so I came up with my own method and it worked beautifully!
First, I printed an "A" in a few of my favorite fonts to test out which one I'd like best. I cut them into little squares and decided on what I liked best...then I printed out different sizes of the chosen font to see what would be the best fit.


Next, I taped the square onto the shoe and used a safety pin to poke holes to trace the letter onto the rubber sole. Once I peeled the paper off, there was a faint outline of the letter (so I don't have to worry about a glue mistake doing it freehand).




Then, I traced a little part of the outline with clear nail polish (actually it was nail hardener so I don't know if that made a difference but its STRONG!). I took some tweezers and one by one put the little lilac rhinestones on along the nail polish.  After it dried, you could no longer see the nail polish.

I decided not to do the little loopy thing at the end because I wanted to hang on to a few extra rhinestones just in case a couple fall out before the wedding (since I still have 5 months to go and a few more fittings). I like them the way they are, but still might finish that little loop at the end. If not, the pin pricks don't show up...only at a certain angle in the light.








Quelle: http://www.projectwedding.com/wiki/show/bridal-shoe-bling
Freie Übersetzung folgt

Sonntag, 29. März 2009



Brautfrisuren "romantisch Hochgesteckt"





Brautfrisuren "Dut"



Hallo liebe Bräute,
nicht nur die Wahl des Brautkleides, kann eine Braut zum Rande der Verzweiflung führen, denn ähnlich verhält es sich, bei der Wahl der passenden Frisur.

Hier möchte ich Ihnen eine Art kleinen Gedankenleitfaden aufführen, wie Sie für sich, die beste Frisur-Form heraus finden können.

Zunächsteinmal muss die Frage des "Stils" entschieden werden!

Diese ist die wichtigste Frage, welche sich teilweise nur schwer entscheiden lässt. Um diese Frage zu klären überlegt man sich am besten zunächst,  

Wie sieht mein Kleid aus?
Ist es eher opulent gar kaiserlich oder eher schlicht elegant. Oder ist es vielleicht doch eher verträumt und verspielt oder gar sinnlich und sexy?
Wenn sie diese Frage geklärt haben geht es weiter.  

Welche Accessoires werde ich tragen?
Trage Sie einen Schleier? Ein oder mehr Lagig? Mit oder ohne Spitze? Wird er den ganzen Tag getragen oder zu späteren Stunde abgenommen? Stört es Sie, wenn er im Nacken getragen wird?  
Tragen sie ein Diadem, Haarreif oder ähnliches oder gar beides (Schleier)?
All das muss berücksichtigt werden.
Wenn Sie dann all diese Fragen geklärt haben, kommt es zur wichtigsten Frage.


Welchen Stil möchten Sie auf ihrer Hochzeit bewirken.
Soll es insgesamt sehr edel und Stilvoll zugehen, oder lieber locker fröhlich, oder doch eher ländlich rustikal oder romantisch elegant wie für eine Prinzessin 
Entscheiden sie hier aus dem Bauch herraus. Wenn sie bereuts am Anfang für eine getroffene Entscheidung "Bauchweh" haben, überdenken Sie sie lieber nocheinmal. Nicht jeder muss wie ich 3mal das Farbkonzept ändern nur um nicht wieder "Typisch!" zu sein ;)
Im übrigen gillt hier "Schwarz-Weiß-Denken ausschalten", der Mix ist oft das, was eine Hochzeit so einmalig macht.

Wenn Sie diese Fragen geklärt haben ist der Rest kinderleicht.
Denn für welche der 3 Grundarten der frisurenform Sie sich entscheiden, ergibt sich dann meist von selbst.

Grundarten sind:
  • Hochgesteckt engl. Updo (alle Haare werden je nach Stilwunsch streng oder locker hochgesteckt)
  • Halbhochsteckt engl. Half Updo (nur die obere Haarpartie wird gesteckt, die untere bleibt offen)
  • offen (die gesamte Haarlänge bleibt offen, nichts wird gesteckt)